img testata

Preliminary design of modernization interventions of the Circumetnea railway line (Italy)

Chemins de fer et transports urbains Chemins de fer

Preliminary design of modernization interventions of the Circumetnea railway line (Italy)

The existing railway was built at the end of 18th century, around the Etna volcano and climbing mountain slopes up to about 1 The project for improving the Palermo – Agrigento railway line concerns the section of line between Fiumetorto station, in the province of Palermo, and Agrigento Central station, for a total length of just over 94 km. 

The planned works include:

  • realization of 14 alignment variants, with a design speed of 90-120 km/h, including related structures, for a total of approximately 25 km.
  • realization of a new line section, the “Lercara variant”, of about 6.3 km, design speed 140 km, with the construction of a tunnel 2.7 km long, including civil works and installations.
  • minor relocations of the permanent way at various points of the alignment;
  • realization of replacement works to eliminate all the level crossings (no. 26) along the existing Fiumetorto – Agrigento line. 
  • realization of rail/road intermodal junctions for passengers, with the upgrading of the stations of Roccapalumba, Cammarata and Aragona.
  • improvement of the section Agrigento Bassa – Porto Empedocle, with works to improve the line quality, paying particular attention to the verification and consolidation of the structures (tunnels, bridges, protection and drainage works).
  • upgrading of the existing tunnels to class C.22, with works on the tunnel linings and lowering of the tracks. 
  • reclassification of the line to category C3 with the upgrading of the permanent way and the structures in view of the effect of the increased axle load and speed.
  • introduction of the higher speed limits C and P for faster trains (Intercity and Commuter trains).
  • realization of new electric traction, safety, signalling and telecommunications installations and upgrading of the existing systems.
afficher plus d'informations afficher moins d'informations

Client

Ferrovia Circumetnea

Lieu

Sicily, Italy

Prestations de service

Preliminary Design, EIA

Coût des travaux

Euro 1,325,693,754

circumetnea-z-3-01
circumetnea-z-3-02
circumetnea-z-3-03
circumetnea-z-3-04
circumetnea-z-3-05
montrer plus de photos afficher moins d'images

Transport urbain

Tramway System of Palermo